It looks like to me that either the steerer is broken but still held by the stem, or it is loose where it attaches to the forks. It doesn't look like its the head set as then it would move forward and backwards without pivoting
![Image](http://i301.photobucket.com/albums/nn47/mikesbytes/Miscellaneous/UNI_1558.jpg)
Are you talking about a crown race setter? That has to be my favourite tool. Mmmmm big crazy tool for doing such a simple job. Does anyone actually own one though?You can get the old one off with a hammer and chisel, unless you have the special tool.
Anyone who has a 20cm of pipe with a nice flat end, as well as a big mallet has all the tools they need to install a headset. To get one off, I find a few gentle taps with something like a hammer and a "6-inch" nail gradually going from each side of the headset race will slowly work it up the steere until it pops loose. To protect the headset race, I have the head of the nail strike the race, not the pointy end.Are you talking about a crown race setter? That has to be my favourite tool. Mmmmm big crazy tool for doing such a simple job. Does anyone actually own one though?
Users browsing this forum: No registered users and 5 guests