Cable cutters & crimpers - recommendations

Parts, bike builds, tools, tips and maintenance.
User avatar
Stuart
Posts: 2568
Joined: 11 Mar 2008, 10:43
Location: Dulwich Hill

Postby Stuart » 10 Apr 2013, 17:05

I need to invest in a new tool. Specifically one to cut cables and crimp cable end caps on.

I was going to buy a Park Tool CN-10 but read some reviews and watched a video where they were not exactly highly praised. Ok, but not fabulous.

Then it was the Pedros - universal acclaim, but no integrated crimper, so then I'd need to buy a crimper as well.

So, what does the DHBC brains trust use or recommend?

User avatar
weiyun
Posts: 4173
Joined: 17 Nov 2006, 22:32
Location: Birchgrove
Contact:

Postby weiyun » 10 Apr 2013, 17:25

I have the Park Tools model and all the cable cuts it made have been clean and square. Crimper works well. What it does badly is in the cutting of cable sheaths. It's never square and invariably the ends need to be filed and cleaned up. Yet, given the design of those sheaths, I don't think any of these simple cutters can do a nice job. The best solution in my mind is with a high speed Dremel cutter or similar. I now have one of these and will put it to use when I refurbish my bikes soon. You can always just invest in a Dremel and an electrical crimper but there may be time when you need the cutter out in the field where there's no electricity.

timothy_clifford
Posts: 270
Joined: 13 Feb 2012, 19:04

Postby timothy_clifford » 10 Apr 2013, 17:47

I just went with a generic cable cutter from Bunnings and a pair of long nose pliers.

User avatar
Adrian E
Posts: 1163
Joined: 07 Mar 2007, 13:15
Location: Newtown

Postby Adrian E » 25 Apr 2013, 13:11

Felco cable cutters are regarded by many as the best in the business. They are not a bicycle specific company but this mean they don't work? Of course not... See the C7 one handed cable cutter below, but you get what you pay for: http://www.felco.com.au/felco/pages/tools.page?
To be honest, I have no problem with the Park Professional Cable cutter and it works well for housing too. I use it all the time so I'd just go with it or the Pedros. Btw: I don't think the video above is quite fair as the cables being cut are not standard gear or brake cables. You will get a clean cut with the Park tool on a normal cable. Just never cut any spokes with cable cutters. It doesn't take much to ruin them.

User avatar
geoffs
Posts: 239
Joined: 20 Nov 2006, 12:07
Location: Ashbury

Postby geoffs » 27 Apr 2013, 04:39

We use a superB cable cutter at work. It has a small point on pivot which does a great job of flaring the inside of the cable housing


Return to “The Workshop”

Who is online

Users browsing this forum: No registered users and 0 guests