how to trip traffic lights

Bicycle related chatter & discussion
User avatar
geoffs
Posts: 239
Joined: 20 Nov 2006, 12:07
Location: Ashbury

Postby geoffs » 28 Jul 2008, 11:04

Just found this explanation on how signal loop detection works for signalling traffic lights to change.
http://www.cyclistview.com/signaldetection/index.htm
I'm sure that the light in Sydney would work the same way.

User avatar
Huw
Posts: 346
Joined: 07 Mar 2007, 15:20
Location: Canberra
Contact:

Postby Huw » 28 Jul 2008, 14:35

As far as I can tell, the loops work on detecting some deflection of a magnetic field, but the vast majority of bike rims (presentation quotes up to 10x better deflection than frame) and frames today are non-ferrous (no iron), which would make any attempt of deflection useless?

User avatar
mikesbytes
Posts: 6991
Joined: 13 Nov 2006, 13:48
Location: Tempe
Contact:

Postby mikesbytes » 28 Jul 2008, 15:04

I understand that it doesn't matter which metal the rims are made from, ie Alloy is fine. CF would be a problem.

User avatar
weiyun
Posts: 4173
Joined: 17 Nov 2006, 22:32
Location: Birchgrove
Contact:

Postby weiyun » 28 Jul 2008, 19:33

Yes, I have always ridden that way, along and right over the axis of the inlaid cable. Works pretty well. :D

User avatar
jimmy
Posts: 988
Joined: 13 Nov 2006, 10:15
Contact:

Postby jimmy » 29 Jul 2008, 08:16

always works for me too.

As I often say, I am a motorists worst nightmare... A cyclist who knows how to trip the lights...

James

User avatar
weiyun
Posts: 4173
Joined: 17 Nov 2006, 22:32
Location: Birchgrove
Contact:

Postby weiyun » 29 Jul 2008, 13:19

As I often say, I am a motorists worst nightmare... A cyclist who knows how to trip the lights...
And then jump the red and leave a ghost for the green light? :wink:

User avatar
geoff m
Posts: 1072
Joined: 13 Nov 2006, 20:41

Postby geoff m » 29 Jul 2008, 22:54

and the good news is for those of us who miss the mark and don't change the lights, with no prospect of other cars triggering it, may proceed through the intersection treating the lights as a Stop Sign (Australian Road Rules)

User avatar
geoffs
Posts: 239
Joined: 20 Nov 2006, 12:07
Location: Ashbury

Postby geoffs » 30 Jul 2008, 12:32

didn't know about that rule Geoff. Is there a time limit for how long you have to wait?

User avatar
weiyun
Posts: 4173
Joined: 17 Nov 2006, 22:32
Location: Birchgrove
Contact:

Postby weiyun » 30 Jul 2008, 14:52

didn't know about that rule Geoff. Is there a time limit for how long you have to wait?
I wondered about the time frame too. And how does one prove the inability to trigger? Ever been tested in the courts?

User avatar
jimmy
Posts: 988
Joined: 13 Nov 2006, 10:15
Contact:

Postby jimmy » 30 Jul 2008, 16:36

I know when I ride early on Sunday solo that there is a set of lights that I can't always trigger. I wait about 30-40 seconds, and then proceed with caution.

It is usually pre 6am on a Sunday, so it is pretty easy to find a gap, even on a busy road like King Street.

James

User avatar
mikesbytes
Posts: 6991
Joined: 13 Nov 2006, 13:48
Location: Tempe
Contact:

Postby mikesbytes » 30 Jul 2008, 23:13

Toff and I applied the principal tonight with complete success 8)

Belinda
Posts: 17
Joined: 04 May 2008, 19:35

Postby Belinda » 08 Nov 2008, 20:42

I can clearly remember one freezing cold Saturday where the Slowies bunch stopped 20m short of an intersection in a patch of sun and made Llewellyn ride up to the line and trigger the lights.

User avatar
weiyun
Posts: 4173
Joined: 17 Nov 2006, 22:32
Location: Birchgrove
Contact:

Postby weiyun » 08 Nov 2008, 21:11

I can clearly remember one freezing cold Saturday where the Slowies bunch stopped 20m short of an intersection in a patch of sun and made Llewellyn ride up to the line and trigger the lights.
Ride faster if you want to get warm! :lol:


Return to “Conversation”

Who is online

Users browsing this forum: No registered users and 0 guests